marine fendersystems

PsG MARINE PILE FENDERS, NEW PRODUCT!

  • 2024-10-15

PsG Marine Pile fenders provide an effective way to protect steel or concrete piles from barge traffic. They are pre-curved to suit the required diameter pile and degree of coverage needed.  These pile wrap fenders are clamped to a pile depending on the project requirements.

PsG Model Marine Pile half cylindrical Fenders are manufactured in pre-curved units ready to install. The PsG Marine Pile half cylindrical Model can be clamped to steel dolphin piles, or to concrete piles. There are different softness to satisfy particular design requirements. Area of coverage depends upon batter and number of piles in cluster.
Applications include, but are not limited to: ferry landings, barge mooring dolphins, bridge foundations and landing dolphins.

Easy to install, easy to combine the different length needed, they rapidly becoming the ideal fender choice for piles.

PRODUCT INFORMATION

PsG SAN Arch Fender or PsG SAN-PE Arch Fender

  • 2023-03-30

Our hugely popular PsG SAN Fender is an efficient fender type where the energy/reaction force ratio can be recommended for all types of applications. The PsG SAN Arch Fender is particularly useful for vessels with high allowable hull pressure and for locations where installation space is limited. PsG SAN archfender can be equipped with an extra vulcanized steel plate within the top of the fender. This allows for the installation of a low friction UHMW PE face pad or a steel fender panel or even mounting the fender unit behind a piled structure. This variant is then called the PsG SAN-PE fender.

Characteristics:

Good energy absorption and low reaction force

Proven design

Long service life

Easy to install and replace

Excellent shear resistance

PsG SAN-PE Arch fender with. mounted UHMW-PE face pad
PsG-SAN-arch-fender-info.pdf
Kajskydd Fender

PsG SAN ARCH FENDER – RELIABLE FOR A WIDE RANGE OF BERTHS

  • 2017-12-05

Our SAN Arch Fenders are particularly useful for vessels with high allowable hull pressures and for locations where mounting space is limited. It is reliable for a wide variety of berths even under the most severe conditions. This robust rubber fender from Portsuppliers Group can be equipped with an additional embedded steel plate. This allows the installation of a low friction PE-rubbing plate, a steel fender panel or the mounting of the fender unit behind a pile construction.

Key performance characteristics include:

Good energy absorption and low reaction force.
With shockproof plates at the front, it may reduce surface pressure.
Pro-longed life and easy replacement.
Excellent shear resistance.

Portsuppliers Group is specialized in safe berthing and mooring of vessels within harbours and ports as well as waterways and offshore structures.

Floating Fender, Portsuppliers Group

PsG FOAM-FILLED DONUT FENDERS AN EFFECTIVE FENDER SOLUTION

  • 2017-10-04

PsG Donut Fenders are engineered to be installed over monopiles to provide free vertical and radial movement to ensure maximum protection. With high energy absorption and low maintenance the PsG Donut Fender can be used effectively for dock and port entrances and bridge supports.

The construction reminds of a foam-filled fender with a polyurethane elastomer skin and a cross-linked  closed cell thermolaminated polyethylene foam core. The central tube has wear pads with UHMW-PE for excellent lowfriction.

The PsG Donut Fender will be sized to fit its purpose, they are unsinkable and can be finished in a variety of colors.

When it comes to installation the fender has to be lifted and lowered onto the fender pile and then ready for use!

Marine Fender System Designed By Portsuppliers Group

PORT OF HELSINGBORG HAS NOW INSTALLED THEIR NEW FENDERSYSTEMS FROM PORT SUPPLIERS GROUP!

  • 2017-09-08

The new LE-fendersystem with closed steelpanels mounted with our high grade lowfriction UHMW-PE frontpads are now installed in the Port of Helsingborg.

Do you want to know more about the LE-fenders, steelpanels or the lowfriction pads, please contact us or look at our range of products on this site.

Marine fendersystem with LE-element, steelpanel with UHMW-PE pads from Portsuppliers Group i Trelleborg.

Back To Top